Post Template Parameters
- Last UpdatedFeb 23, 2023
- 2 minute read
The Parameters part of the Create Post Template window allows the administrator to define the Post Template dimensions.
|
Post Length |
Select the Variable radio button to input a Default value in the Default field. Select the Fixed radio button to input a Fixed value in the Value field. |
|
Bottom Vertical Offset |
Select the Variable radio button to input a Default value in the Default field. Select the Fixed radio button to input a Fixed value in the Value field. |
|
Bottom Horizontal Offset |
Select the Variable radio button to input a Default value in the Default field. Select the Fixed radio button to input a Fixed value in the Value field. |
|
Extension Length |
Select the Variable radio button to input a Default value in the Default field. Select the Fixed radio button to input a Fixed value in the Value field. |
|
Extension Plate Depth |
Select the Variable radio button to input a Default value in the Default field. Select the Fixed radio button to input a Fixed value in the Value field. |
|
Upper Intermediate Rail Height |
Input a value to define the upper intermediate rail height for the template. To remove the upper intermediate rail height element from the template, click to clear the Included check box. |
|
Lower Intermediate Rail Height |
Input a value to define the lower intermediate rail height for the template. To remove the lower intermediate rail height element from the template, click to clear the Included check box. |
|
Mounting Plate Thickness |
Input a value to define the mounting plate thickness for the template. To remove the mounting plate thickness element from the template, click to clear the Included check box. |
|
Mounting Plate Width |
Input a value to define the mounting plate width for the template. To remove the mounting plate width element from the template, click to clear the Included check box. |
|
Mounting Plate Length |
Input a value to define the mounting plate length for the template. To remove the mounting plate length element from the template, click to clear the Included check box. |
|
Extension Plate Thickness |
Input a value to define the extension plate thickness for the template. To remove the extension plate thickness element from the template, click to clear the Included check box. |
The diagram below illustrates the Post Template dimensions as an example:
Click Next to display the Profiles part of the Create Post Template window. Refer to Post Template Profiles for further information.
Click Back to return to the General part of the Create Post Template window.
Click Cancel to discard any inputs and return to the SLH Administration Tasks window.