Draw Circle with Specified Radius
- Last UpdatedJan 23, 2023
- 2 minute read
Draws a circle with a specified radius.
You are prompted to Specify the centre point or <Circumference>
Input values in the dimension fields and press Enter or click to identify the center point of the circle.
You are then prompted to Specify the radius or <Diameter>
Input a dimensional value in the field and press Enter or click to identify the edge of the circle.
The circle is drawn and the command ends automatically.
Throughout the circle creation process you can press ESC to cancel the command. Additional functionality is also available.
|
|
|
|
Circumference |
Press the down arrow key and select Circumference to draw a circle with a specified circumference. Refer to Draw Circle with Two Specified Points for further information. |
|
Diameter |
Press the down arrow key and select Diameter to draw a circle with a specified diameter. Refer to Draw Circle with Specified Diameter for further information. |
|
Change reference point |
Press the down arrow key and select Change reference point to specify a radius distance or reference point. Refer to Draw Circle with Specified Radius using a Distance or Reference Point for further information. |
The new NOTE element displays in the Draw Explorer containing a CIRC element.
