Component Selection Tab

Sets the available trunnion types that can be used on a project, and which trunnion bore sizes and trunnion components are available to the user.

Trunnion Bores List

The size of the pipe is specified by clicking the Bore up/down arrows. The available trunnion bores for the selected trunnion type and pipe bore display in the Trunnion Bores list.

To make a trunnion bore size available to the user, select an item in the Inactive list and click the right arrow at the side of the list. The item is transferred to the adjacent Active list. Click the left arrow to reverse the action.

The default trunnion bore displays at the top of the Active list.

Trunnion Sizes

The trunnion size is the length of the trunnion from the bottom of the trunnion baseplate, (not the bearing plate) to the center of the pipe to which it is welded/clamped.

The minimum and maximum trunnion size for the selected trunnion type and pipe bore can be set, as well as the default trunnion size (length).

Components for Trunnion Bore List

The available ancillary components for the selected trunnion are listed. A list is available for each component type based on support class.

The support classes for trunnions are:

• TRUNNION BASE PLATE

• TRUNNION BEARING PLATE

• TRUNNION COLLAR PLATE

• TRUNNION CLAMP

• ISOLATION BLOCK

• BREAK OUT PLATES

• INLINE REINFORCING PLATE

To make a trunnion component available to the user, select an item in the Inactive list and click the right arrow at the side of the list. The item is transferred to the adjacent Active list. Click the left arrow to reverse the action.

The default trunnion component displays at the top of the Active list.

Preview

The preview part of the Component Selection tab allows you to view a 2D representation of the currently selected trunnion component.

Right-Click Menu

You can right-click either the list of active trunnion bores or the list of active trunnion bore components to display a drop-down menu.