3D Coordinate Label
- Last UpdatedApr 21, 2023
- 2 minute read
Adds a label containing positional information to a view.
Note:
3D Coordinate labels are generated from a special Symbol Template (SYTM). To setup
the default template for this label type:
-
The correct Advanced Labels library must be set in the System Defaults. Refer to Set System Defaults for further information.
-
The SpPurpose attribute of the selected library template must be set to COORD.
You are prompted to Specify attachment point
Click to identify the Ppoint provided by the design element to be labelled.
You are then prompted to Specify connection point or
Input values in the dimension fields and press Enter or click to identify the position of the label text.
The process can be repeated, allowing you to add multiple labels.
Press ESC to end the command.
Throughout the label creation process you can press ESC to cancel the command. Additional functionality is also available.
|
|
|
|
Template |
Press the down arrow key and select Template to select a different label template. |
|
Same As |
Press the down arrow key and select Same As to select a different label template derived from an existing label on the drawing canvas. You are prompted to Select label element Click to identify the label, the template of the selected label is used for the created label. |
The new SLAB element displays in the Draw Explorer.
