Draw Lines with Specified Points
- Last UpdatedApr 20, 2023
- 2 minute read
Draws a line with specified points.
You are prompted to Specify the first point or <Finish>
Input values in the dimension fields and press Enter or click to identify the starting point of the line.
You are then prompted to Specify the next point or <Finish>
Input values in the dimension and angle fields and press Enter or click to identify the point to which the line is drawn. A line is drawn between the two specified points.
The prompt is repeated, allowing you to create multiple lines. The first point of a new line is positioned at the same point as the second point of the previous line.
Input F at the prompt and press Enter to end the command.
Note:
If more than one line is created, no connection is made between the lines.
Throughout the line creation process you can press ESC to cancel the command. Additional functionality is also available.
|
|
|
|
Displacement |
Press the down arrow key and select Displacement to draw a line with a specified displacement. Refer to Draw Lines with Specified Displacement for further information. |
|
Back |
Press the down arrow key and select Back to undo the last action. |
|
Close |
Press the down arrow key and select Close to link the two endpoints of the drawn lines with an automatically drawn line and end the command. |
|
Finish |
Press the down arrow key and select Finish to end the command. |
The new NOTE element displays in the Draw Explorer containing a STRAI element that represents each line.
