Create Rectangle Panel with Two Specified Points
- Last UpdatedMar 15, 2024
- 2 minute read
Creates a rectangle panel with two specified points.
You are prompted to First corner (Thk: #mm, Just: #, fillet: #mm) or
Input values in the dimension fields and press Enter or click to identify the first corner position.
You are then prompted to Second corner (Thk: #mm, Just: #, fillet: #mm) or
Input values in the dimension fields and press Enter or click to identify the second corner position. A rectangle panel is created and displays in the 3D view.
Throughout the panel creation process you can press ESC to cancel the command. Additional functionality is also available.
|
|
|
|
Fillet |
Press the down arrow key and select Fillet to create a panel with a specified fillet. You are prompted to Fillet or <#> Input a dimensional value in the field and press Enter to set the fillet of the panel. |
|
Thickness |
Press the down arrow key and select Thickness to create a panel with a specified thickness. You are prompted to Panel thickness or <#> Input a dimensional value in the field and press Enter to set the thickness of the panel. |
|
Justification |
Press the down arrow key and select Justification to define the justification position of the panel. Input a justification value in the field and press Enter or press the down arrow key and select a justification value. |
|
Top |
Press the down arrow key and select Top to create a panel with top justification. |
|
Bottom |
Press the down arrow key and select Bottom to create a panel with bottom justification. |
|
Centre |
Press the down arrow key and select Centre to create a panel with centre justification. |
|
Back |
Press the down arrow key and select Back to undo the last action. |
The new PANE element displays in the Model Explorer.
Refer to Non-Routed Item for further information.