Create Ladder

Referring to the hierarchy, a ladder element must reside below an existing group element with a purpose set to Free.

From the Select Structural Element pane of the Building Applications window, make sure that the Group element is the CE.

To represent a ladder, the application uses a number soft element types below a Group element (GENSEC).

Below the GENSEC (used to represent the Ladder Component) a SPINE element is used to store position information and a TMPL element used to store the geometry elements.

On the Building tab, in the Create group, select Ladder in the Create Element drop-down list.

Click Create Element to display the Create Ladder window.

By default in the Naming pane of the Create Ladders window, the application automatically populates the Name field with a name based on the project or company autonaming rules. for further information on the autonaming rules, refer to Naming for further information.

The Use gaps in naming sequence checkbox is also selected by default, the user can select which auto name is to be used. To select the:

• first available name, click first available name.

• previous available name, click previous available name.

• next available name, click next available name.

• last available name, click last available name.

The user can change the name which does not conform to the autonaming rules, to do this, type a new name into the Name field. If this name already exists, an Error window is displayed. If the name does not conform with the autonaming rules, Apply remains greyed out as long as the name is not properly entered.

The Default Material drop-down list by default is set to Pyrocrete, the default material can be changed to another suitable material. From the Default Material drop-down list, the user can select from a list of suitable materials.

The material is used to calculate the weight. The density of the material selected is shown in a tooltip.

In the Assembly pane of the Create Ladder window, by default None is displayed. The user can add a selected assembly if required. Refer to Create Assemblies for further information.

Click Apply to create the Ladder element. The Modify Ladder window is displayed and the Ladder element is displayed in the Model Explorer and in the Building Applications window. Refer to Modify Ladder for further information.

To cancel the creation of the ladder, click Dismiss. If the user navigates to another element, the Modify Ladder window closes automatically.

Note:

It is also possible to create a ladder with AVEVA E3D Design using the Stairs, Ladders and Handrails application. On the Stairs Ladders and Handrails tab, in the Create group, click Rung Ladder.