Create Disc Panel with Two Specified Points
- Last UpdatedMay 05, 2023
- 2 minute read
Creates a disc panel with two specified points.
You are prompted to Start diameter point or
Input values in the dimension fields and press Enter or click to identify the first diameter point position.
You are then prompted to End diameter point (Thk: #mm, Just: #) or
Input a dimensional value in the field and press Enter or click to identify the diameter of the disc panel. A disc panel is created and displays in the 3D view.
Throughout the panel creation process you can press ESC to cancel the command. Additional functionality is also available.
|
|
|
|
Centre+ |
Press the down arrow key and select Centre+ to create a disc panel with a specified centre point. Refer to Create Disc Panel with Specified Centre Point for further information. |
|
Three point |
Press the down arrow key and select Three point to create a ring panel with three specified points. Refer to Create Disc Panel with Three Specified Points for further information. |
|
Justification |
Press the down arrow key and select Justification to define the justification position of the panel. Input a justification value in the field and press Enter or press the down arrow key and select a justification value. |
|
Back |
Press the down arrow key and select Back to undo the last action. |
|
Top |
Press the down arrow key and select Top to create a panel with top justification. |
|
Centre |
Press the down arrow key and select Centre to create a panel with centre justification. |
|
Bottom |
Press the down arrow key and select Bottom to create a panel with bottom justification. |
The new PANE displays in the Model Explorer.
Refer to Non-Routed Item for further information.