Modify Panel Fitting Properties
- Last UpdatedMay 05, 2023
- 2 minute read
The properties of selected fittings can be modified using the Properties window. Refer to Properties for further information.
The general and positional properties of PFIT elements are identical to GENSEC properties. Refer to Modify Section Properties for further information.
|
Specification |
|
|
Surface justification |
Input a value in the field or select a justification from the drop-down list to modify the fitting justification position. For example, select Top outward from the drop-down list to modify the justification position of the fitting to top outward. |
|
Reference |
Displays the specification reference of the fitting which is populated from the Spec, Sub-type and Fitting fields. |
|
Spec |
Input a value in the field or select a specification from the drop-down list to modify the fitting specification. When a specification is selected, the type and fitting drop-down lists are populated with the components that were used when the specification was most recently selected. |
|
Sub-type |
Input a value in the field or select a sub-type from the drop-down list to modify the fitting sub-type. The sub-type drop-down list is populated with the fitting sub-types that are associated with the currently selected specification. |
|
Fitting |
Input a value in the field or select a fitting from the drop-down list to modify the panel fitting. The fitting drop-down list is populated with the fitting types that are associated with the currently selected specification. |
|
Material |
Input a value in the field or select a material from the drop-down list to modify the fitting material. The material drop-down list is populated with the materials that are associated with the currently selected specification. |