Termination Template Parameters
- Last UpdatedFeb 23, 2023
- 3 minute read
The Parameters part of the Create Termination Template window allows the administrator to define the Termination Template dimensions.
|
Top Rail Height |
Select the Variable radio button to input a Default value in the Default field. Select the Fixed radio button to input a Fixed value in the Value field. |
|
Width |
Select the Variable radio button to input a Default value in the Default field. Select the Fixed radio button to input a Fixed value in the Value field. |
|
Horizontal Offset |
Select the Variable radio button to input a Default value in the Default field. Select the Fixed radio button to input a Fixed value in the Value field. |
|
Extension Length |
Select the Variable radio button to input a Default value in the Default field. Select the Fixed radio button to input a Fixed value in the Value field. |
|
Extension Plate Depth |
Select the Variable radio button to input a Default value in the Default field. Select the Fixed radio button to input a Fixed value in the Value field. |
|
Upper Intermediate Rail |
Input a value to define the upper intermediate rail height for the template. To remove the upper intermediate rail height element from the template, click to clear the Included check box. |
|
Lower Intermediate Rail |
Input a value to define the lower intermediate rail height for the template. To remove the lower intermediate rail height element from the template, click to clear the Included check box. |
|
Plate Thickness |
Input a value to define the plate thickness for the template. To remove the plate thickness element from the template, click to clear the Included check box. |
|
Plate Depth |
Input a value to define the plate depth for the template. To remove the plate depth element from the template, click to clear the Included check box. |
|
Plate Width |
Input a value to define the plate width for the template. To remove the plate width element from the template, click to clear the Included check box. |
|
Mounting Plate Thickness |
Input a value to define the mounting plate thickness for the template. |
|
Mounting Plate Width |
Input a value to define the mounting plate width for the template. |
|
Mounting Plate Length |
Input a value to define the mounting plate length for the template. |
|
Extension Plate Thickness |
Input a value to define the extension plate thickness for the template. |
The diagram below illustrates the Termination Template dimensions as an example:
Click Next to display the Profiles part of the Create Termination Template window. Refer to Termination Template Profiles for further information.
Click Back to return to the General part of the Create Termination Template window.
Click Cancel to discard any inputs and return to the SLH Administration Tasks window.