View Configuration Options

Sets the default view configuration, view regeneration and view projection options.

The sliders can be used to change the sensitivities of view operations. Move the slider to the right to increase the sensitivity.

Moving the Curve Vectorization Precision slider to the right specifies more precise curve generation, this can degrade performance for extensive drawings.

Regeneration

Select the Automatic regen on zoom change check box to automatically regenerate objects when the scale is changed.

Automatic regeneration is performed in the background, so you can always view the best curve vectorization, without performance penalties, when working with a drawing.

Select the Dynamic Line Styles check box to scale the line type pattern when the sheet is zoomed in or out.

Projection

You can define the default view angle for a projection. Refer to Create Orthographic Projection View for further information.

Select the First angle option button to display the defining points of each view of a 3-dimensional object, in the direction of the viewer's gaze onto the interior walls of an imaginary 3-dimensional box surrounding the object.

Select the Third angle option button to produce orthographic views of 3-dimensional objects The defining points of each view of the object project onto the external face of an imaginary 3-dimensional box. The viewpoint is changed by rotation through 90 degree increments about the centre of the object.

Drawlist

You can define the default drawlist behaviour for creating projection, section and detail views. These view types are all created from a source view.

Select the New Drawlist option button to create a new drawlist as a copy of the source view drawlist.

Select the Share Drawlist option button to reference the drawlist from the source view drawlist.

Click Reset to restore the default configuration settings. Refer to Reset Configuration for further information.

Click Apply to update the selected settings.