Gate Template Profiles
- Last UpdatedFeb 23, 2023
- 3 minute read
The Profiles part of the Create Gate Template window allows the administrator to define the Profiles used in the gate template. The profiles are positioned using p-points which are specified by the administrator. If a p-point is selected that requires the presence of a parameter, the SLH application includes the parameter by default.
|
Add |
Click to add a profile to the Profiles list. |
|
Remove |
Click to remove a profile from the Profiles list. |
|
Replace |
Click to replace the currently selected profile in the Profiles list. |
|
Specification |
Click Select to display the Profile for gate template window. The functionality available from the Profile for gate template window is identical to that available from the Top Rail Specification window. Refer to Handrail Profile Specification for further information. The selected Profile Type and Profile Size values display in the Profile column of the Profiles list. The selected P-Line Justification value displays in the Justification column of the Profiles list. |
|
Angle of Rotation |
Input a value to define the rotation angle for the profile. The Angle of Rotation value displays in the Rotation column of the Profiles list. |
|
Bend Radius |
Input a value to define the bend radius for the profile. The Bend Radius value displays in the Radius column of the Profiles list. If there are three or more points, point two will be radiused. If there are five points, point four will also be radiused. |
|
Configuration |
Select a configuration from the drop-down list to specify the profile type. The selected Configuration value displays in the Description column of the Profiles list. |
|
First Point |
Select a first point from the drop-down list to define the first p-point position for the profile. The selected First Point value displays in the first numbered column of the Profiles list. |
|
Second Point |
Select a second point from the drop-down list to define the second p-point position for the profile. The selected Second Point value displays in the second numbered column of the Profiles list. |
|
Third Point |
Select a third point from the drop-down list to define the third p-point position for the profile. The selected Third Point value displays in the third numbered column of the Profiles list. |
|
Fourth Point |
Select a fourth point from the drop-down list to define the fourth p-point position for the profile. The selected Fourth Point value displays in the fourth numbered column of the Profiles list. |
|
Fifth Point |
Select a fifth point from the drop-down list to define the fifth p-point position for the profile. The selected Fifth Point value displays in the fifth numbered column of the Profiles list. |
|
Flip |
Click Flip to reverse the order of the defined points. |
Click Next to display the Plates part of the Create Gate Template window. Refer to Gate Template Plates for further information.
Click Back to return to the Parameters part of the Create Gate Template window.
Click Cancel to discard any inputs and return to the SLH Administration Tasks window.