Limits
- Last UpdatedAug 14, 2025
- 2 minute read
Sets the view to the currently selected element.
Limits CE
Sets the view to the currently selected element which is fitted into the view area
Extents
Sets the view to the limits extents.
Limits Explicit
Defines the view limits as the 3D coordinates of two diagonally opposed corners of the limits box.
Select Limits Explicit to display the Volume - Design window and the Positioning Control window.
A box is drawn in the 3D Graphical view showing the current limit setting which you can re-define. Enter new values in the fields, picking two diagonally opposed corners of the limits box or by using the following options from the Select drop-down menu.
|
CE |
Sets the limits box to enclose the CE. |
|
Owner |
Sets the limits box to enclose the owner of the CE. |
|
Pick |
You are prompted to Pick item to be used for volume from the 3D Graphical view. When you have picked an item, the limits box is set to enclose the picked item. |
|
Pick Owner |
You are prompted to Pick item, which is to be used for volume from the 3D Graphical view. When you have picked an item, the limits box is set to enclose the owner of the picked item. |
Click Apply to accept the set limits or Cancel to close the Volume - Design window.
Limits Obstruction
Sets the view limits to include all elements in the current Obstruction List.
Note:
Used for clash checking.
Limits Clip Box
Sets the limits box to have the same defining coordinates as the current clip box.