Example: Add a Bar above the HVAC
- Last UpdatedJan 24, 2023
- 1 minute read
In this case, relative positioning of the bar must be enabled as it is affected by any height changes to the duct. GENSEC start and end extensions are the same as bar 1.
The configuration is:
:MDSConfigA true,U,1,HEIGHT\true,0.5\true,0.5
Element Positioning
|
Enable Relative Element Positioning |
Move Direction |
Proportion of difference from Reference Duct |
HVAC Relative Dimension |
|
|
Value |
TRUE |
U |
1 |
HEIGHT |
|
Description |
Relative positioning required. |
Offsets are in the UP direction, relative to STRU orientation. |
Bar is offset by 1 x (500 - HVAC dimension in relative direction, for example, HEIGHT). |
The HVAC dimension that is compared against the reference. |