Arc Three Point
- Last UpdatedAug 14, 2025
- 2 minute read
Creates an arc with three specified radius points.
You are prompted to pick the 1st circumference point or
Input values in the dimension fields and press Enter or click to identify the first point position.
You are then prompted to pick the 2nd circumference point or
Input values in the dimension fields and press Enter or click to identify the second point position.
You are then prompted to pick the 3rd circumference point or
Input values in the dimension fields and press Enter or click to identify the third point position. A construction aid arc is created and displays in the 3D view.
Throughout the construction aid arc creation process you can press ESC to cancel the command. Additional functionality is also available.
|
|
|
|
Diameter |
Press the down arrow key and select Diameter to create a construction aid arc with specified diameter points. |
|
Centre+Sweep |
Press the down arrow key and select Centre+Sweep to create a construction aid arc with specified center point, radius or diameter, and sweep angle. Refer to Arc Centre + Sweep for further information. |
|
Back |
Press the down arrow key and select Back to undo the last action. |
Refer to Non-Routed Item for further information.