Branch Reinforcement Tab
- Last UpdatedNov 13, 2023
- 3 minute read
By default, a separate tab displays on the Support Editor window for each branch reinforcement.
The 2D View part of the Support Editor window allows you to modify the size and position of the branch reinforcement.
The values in the text fields can be modified to define the size and position of a branch reinforcement.
|
|
Select default tab |
Click to display the default tab. The default tab is the first tab created and is positioned furthest left. |
|
|
Select ancillary tab by canvas pick |
Click to display the tab for an identified ancillary using a cursor pick in the 3D view. You are prompted to Identify ancillary in current support |
|
|
2D/3D View |
Click to display a 3D view of the branch reinforcement. Refer to 3D View Tab for further information. |
|
Dimensions |
Input values in the Dimensions fields to explicitly modify the dimensions of the branch reinforcement. If a value is entered that is outside the allowable range, an error message displays summarizing the problem.
|
|
|
|
Reinforcing Pad |
Select the check box to add a reinforcing pad to the branch reinforcement. |
|
Type |
Select from the drop-down list to define the reinforcing pad type for the branch reinforcement. |
|
|
Thickness |
Input a dimensional value in the field to define the thickness of the reinforcing pad. |
|
|
Clearance |
Input a dimensional value in the field to define the clearance distance required for the reinforcing pad. |
|
|
Axial Adjustment |
Input a dimensional value in the field to define the position of the reinforcing pad connections along the pipe axis. |
|
|
Radial Adjustment |
Input a dimensional value in the field to define the position of the reinforcing pad connections along the pipe radius. |
|
|
|
Set Parameters to Default |
Click to set the branch reinforcement to its default values. A confirm window displays asking you to OK the action. Click Yes to set the branch reinforcement to its default values. |
