Draw Arc with Specified Start, End and Through Points
- Last UpdatedJan 23, 2023
- 2 minute read
Draws an arc with specified start, end and through points.
You are prompted to Specify the start point or <Angle>
Input values in the dimension fields and press Enter or click to identify the start position of the arc.
You are then prompted to Specify the end point or
Input values in the dimension fields and press Enter or click to identify the end position of the arc.
You are then prompted to Specify the through point or
Input values in the dimension fields and press Enter or click to identify the mid-point of the arc.
An arc is drawn between the start point, through point and end point. The command ends automatically.
Throughout the arc creation process you can press ESC to cancel the command. Additional functionality is also available.
|
|
|
|
Angle |
Press the down arrow key and select Angle to draw an arc with a specified center point, end point and sweep angle. Refer to Draw Arc with Specified Center, End and Angle for further information. |
|
Back |
Press the down arrow key and select Back to undo the last action. |
The new NOTE element displays in the Draw Explorer containing an ARC element.
