Note: 4 /DRA/MAS/H&S_A2/Support_Steel
- Last UpdatedAug 13, 2025
- 2 minute read
The table displays the list of member parts, listing the size of each member and its required length.
|
TEXP 1 |
BTEXT set to BOMST:STB Not used at this release. |
|
TEXP 2 |
BTEX set to HEADER_POS:value1,value2 Value1 and value2 define the upper left corner position of the steel BOM table. The table template (SYTM) is referenced by a SYMB that is created under a VNOT in the Steel BOM layer of the first View when the support drawing is generated. |
|
TEXP 3 |
BTEX set to LABEL_POS:value1,value2 where value1 and value2 define the position of the first SLAB in the steel BOM list. The position is the distance from the lower left corner of the owning BACK. |
|
TEXP 4 |
BTEX set to TILE_X:value where value specifies the horizontal distance between SLABs in the support material list. |
|
TEXP 5 |
BTEX set to ILE_MAX:value Not used at this release. |
|
TEXP 6 |
BTEX set to TILE_Y:value where value specifies the vertical distance between SLABs in the support material list. |
|
TEXP 7 |
BTEX set to TAGGING:name where name specifies the name of the TRST that owns the TAGRs to be used for the support items listing. |
|
TEXP 8 |
BTEX set to TAGGING:name where name specifies the name of the TRST that owns the TAGRs to be used for the structural support steel list BOM. The TRST has two member TAGRs, LOCAL and LABEL. These TAGRs are copied into the appropriate layer and the member SLABs that are generated reference them. The LOCAL TAGR defines criteria for locating the Part Number SLAB in the Views. The LABEL TAGR defines criteria for the Support Material Table and references that specific label template. |
|
TEXP 9 |
BTEX set to TITLE:text where text is used in the log file to indicate the start of messages relating to symbolic labels in the support steel layer owned by the View. |