Modify ADP Location Position
- Last UpdatedNov 13, 2023
- 2 minute read
Sets the datum location position for ADP dimensions.
You are prompted to Identify a support or <ESC> to finish :
Click to identify the support using a cursor pick in the 3D view to display the Location Position window. The selection also displays the Positioning Control window. Refer to Positioning Control for further information.
You are prompted to Modify Position (Distance[0]) Snap :
Click to identify the new datum ADP location position using a cursor pick in the 3D view.
On the Location Position window, click Apply to modify the ADP location or Cancel to discard any changes and close the window.
Alternatively, you can explicitly define the datum ADP location position for the currently selected support using the Location Position window.
The support name displays at the top of the Location Position window.
|
Position |
You can pick an ADP location position using a cursor pick in the 3D view. Alternatively, select the position axis from the Position drop-down lists, choose from East/West, North/South and Up/Down. You can then input the explicit position values in the Position fields. |
|
Lock |
Select the check boxes to lock the explicit position of the ADP location. |
|
wrt |
Input the name of the element to which all co-ordinates are interpreted with respect to. The default wrt is world. |
Click Apply to modify the ADP location or Cancel to discard any changes and close the Location Position window.