Use the Status panel
- Last UpdatedDec 04, 2023
- 1 minute read
The Status panel of XR Instructor displays information about application connection status.
Status information
The Status panel displays the following status information.
|
Item |
Description |
|---|---|
|
State |
Displays the current simulation state: ready, running, or frozen. |
|
Run (play) |
Runs the node. This option is enabled when the simulation state is ready or frozen. |
|
Freeze (pause) |
Pauses the running node.This option is enabled when the simulation state is running. |
|
Time |
Displays the simulation time. If a process simulator is connected, it modifies the process simulation time to match. |
|
Speed |
Displays actual simulation speed. If a process simulator is connected, it modifies the process simulation speed to match. |
|
Set (speed) |
Enables you to modify simulation speed. If a process simulator is connected, it modifies its speed to match. |
Application node details
The following information display for each application node.
|
Column |
Description |
|---|---|
|
Name |
Shows the name of the node. |
|
Connection |
A green spot shows the node is connected to the message bus. A red spot means the node is not connected to the message bus. |
|
State |
Shows the current node simulation state. The possible node states can change depending on the node type. Note: Node state is not always aligned to simulation state. |