9.2.0 upgrade notes
- Last UpdatedOct 01, 2025
- 2 minute read
PI connector
If you have an existing PI integration using an OPC HDA connector and you want to use the new PI connector, convert the OPC HDA connector to a PI connector to avoid recreating tags and configuration on the new PI connector. For detailed conversion steps, see Convert OPC HDA connector that connects to PI server to a PI connector in the administrator help.
ProcessingOrder configuration property
Use this configuration property to define the processing order when multiple movement events share the same sample date during reprocessing. The property appears in the Definition section of a material movement event’s Properties pane. By default, its value is empty or set to zero. To enable its behavior, specify a value for this property. For more information, see Dynamic material movements properties in the administrator help.
Enhanced Metrics KPI calculation based on calendar targets
The Metrics KPI calculation now accurately reflects calendar targets with finer granularity. The system checks each sub-period for target changes within the KPI period and applies the correct target to each sub-period.
When you upgrade to version 9.2.0, the system automatically recalculates existing KPIs if they already exist.
AVEVA Historian SDK 2023 R2 SP1
AVEVA Production Management 2025 version 9.2.0 supports AVEVA Historian SDK 2023 R2 SP1. If your project uses an AVEVA connector (formerly Wonderware connector), it's recommended to upgrade to AVEVA Historian SDK 2023 R2 SP1.
When you set the ServerName property in the AVEVA Connection properties, include the TCP port if you use a non-default port. If you don't specify the port number, port 32568 is used by default.
For details about the ServerName property, see AVEVA data connection properties in the administrator online help.
CLRWebServiceTimeout registry key
Adjust the timeout setting using the Ampla CLRWebServiceTimeout registry key if needed to prevent timeouts. For more information, see Modify the CLR stored procedure timeout setting in the administrator help.