Modify the Default Project Configuration File
- Last UpdatedJul 25, 2023
- 2 minute read
The default project configuration files can be modified using the Integrator Project Configuration Explorer. In the Integrator group, select Config to display the Integrator Project Configuration Explorer window. The Integrator Project Configuration Explorer will either be initially blank or will display the last set of modifications carried out.
|
New |
To create a new configuration (empty or default), select File, then New. There are two options for new configuration files, Empty Configuration and Default Configuration. |
|
Empty Configuration |
An Empty Configuration file provides some simple default settings but will contain no rules for building and comparing elements. |
|
Default Configuration |
A Default Configuration provides a copy of the out-of-the-box project configuration file containing a complete set of example rules that can be used out of the box but are available for customisation. |
|
Open |
To open an existing configuration file, select File, then Open, from the displayed Open Project Configuration File window, select the ProjectConfiguration.xml file. By default the appropriate folder is displayed, defined as the Model Management folder under the folder indicated by the project defaults environment variable, for example: for the TTP project: %ttpdflts%\ModelManagement\ProjectConfiguration.xml For general users, Integrator always uses this folder and file combination to read its configuration settings. As a Free user or a member of team CUADMIN, if required open another file in the Configuration Explorer and Integrator will use that file for any subsequent testing. Save those settings to the default file name and location in order to make them available to General users on the project. If required, use the project defaults environment variable to get quickly to the appropriate folder. For example, in the Open Project Configuration File window, for the TTP project, enter %ttpdflts%\ModelManagement in the Filename field and then press Enter. |
|
Revert to Saved |
To discard any changes made to the configuration file but keep it open, select File, then Revert to Saved. |
|
Save |
To save any changes made to the currently open configuration file, select File, then Save. |
|
Save as |
To save the current configuration to a different file, select Save As. |
|
Close |
To close the Integrator Project Configuration Explorer, select File then Close. If there are unsaved changes, a prompt is displayed save them. |
The project configuration file is divided into a number of sections, for the purposes of this guide, the out-of-the-box project configuration file is described.
