Chamfer Multiple Objects
- Last UpdatedSep 20, 2024
- 1 minute read
Applies a chamfer to a number of selected objects.
Click Primitives in the Modify group on the Drawings ribbon and select Fillet>Chamfer.
The prompt Select option: <Select object> is displayed.
Input M at the prompt and press Enter.
The prompt Select option: <Select object> is displayed.
Input S at the prompt and press Enter.
The prompt Select first object is displayed.
Click to identify the first object.
The prompt Select second line is displayed.
Click to identify the second object. The chamfer is created.
The prompt Select option: <Select object> is displayed.
The process can be repeated to chamfer more objects.
Input F at the prompt and press Enter to end the command.
Press ESC to cancel the command. Additional functionality is also available.
|
|
|
|
Select object |
Select an object and begin the chamfer process. |
|
Distance |
Sets the chamfer distance. Refer to Set Chamfer Distance for further information. |
|
Angle |
Sets the chamfer angle. Refer to Set Chamfer Angle for further information. |
|
Trim |
Turns trimming on or off. Refer to Turn Trim On/Off for further information. |
|
Method |
Selects the chamfer method. Refer to Select Chamfer Method for further information. |
|
Finish |
Ends the command. |
