Draw Arc with Specified Center, End and Angle
- Last UpdatedApr 08, 2024
- 1 minute read
Draws an arc with a specified center point, end point and sweep angle.
The prompt Specify the centre point or <Through> is displayed.
Input values in the dimension fields and press Enter or click to identify the center point of the arc.
The prompt Specify the start point or is displayed.
Input values in the dimension fields and press Enter or click to identify the start point of the arc.
The prompt Specify the sweep angle is displayed.
Input an angular value in the field and press Enter or click to identify the end point of the arc.
An arc is then drawn between the specified start point and the sweep angle point. The command ends automatically.
Press ESC to cancel the command. Additional functionality is also available.
|
|
|
|
Through |
Draws an arc with specified start, end and through points. Refer to Draw Arc with Specified Start, End and Through Points for further information. |
|
Back |
Undoes the last action. |
