Draw Elliptical Arc with Specified Axes, Start and End Angle with Rotation
- Last UpdatedApr 08, 2024
- 2 minute read
Draws an elliptical arc with a specified axes, start and end angle and rotation.
The prompt Specify the start of the first axis or <Centre> is displayed.
Input values in the dimension fields and press Enter or click to identify the start point of the first axis of the ellipse that the arc is derived from.
The prompt Specify the first axis length or is displayed.
Input a dimensional value in the field and press Enter or click to identify the length of the first axis.
The prompt Specify the second axis length or <#mm> is displayed.
Input R at the prompt and press Enter.
The prompt Specify the rotation around the first axis or <#deg> is displayed.
Input an angular value in the field and press Enter or click to identify the rotation angle around the first axis.
The prompt Specify the start angle or <Finish> is displayed.
Input an angular value in the field and press Enter or click to identify the start position of the arc.
The prompt Specify the end angle or <Finish> is displayed.
The arc is drawn and the command ends automatically.
Press ESC to cancel the command. Additional functionality is also available.
|
|
|
|
Centre |
Draws an ellipse with a specified center point. Refer to Draw Ellipse with Specified Radius of First Axis and Length of Second for further information. |
|
Distance |
Specifies the length of the second axis.Refer to Draw Elliptical Arc with Specified Axes, Start and End Angle for further information. |
|
Back |
Undoes the last action. |
|
Parameter |
Specifies the start and end points of the arc. Refer to Draw Elliptical Arc with Specified Axes, Start and End Angle and Parameters for further information. |
|
Finish |
Ends the command. |
