Change Length with Specified Delta Length
- Last UpdatedApr 08, 2024
- 2 minute read
Sets the length of an object using a specified delta length.
The prompt Select object to change or is displayed.
Input E at the prompt and press Enter.
The prompt Enter delta length or <#mm> is displayed.
Input a dimensional value in the field and press Enter to specify the distance to increase or decrease the object length (input a negative number to decrease the object length).
The prompt Select object to change or is displayed.
Click to identify the object to change, the object length is modified at the end nearest to the selection point.
The prompt Select object to change or <Finish> is displayed.
The prompt is repeated, multiple objects can be lengthened.
Input F at the prompt and press Enter to end the command.
Press ESC to cancel the command. Additional functionality is also available.
|
|
|
|
Angle |
Changes the length of objects with a specified angle length. |
|
Delta |
Changes the length of objects with a specified delta length. |
|
Percent |
Changes the length of objects with a specified percentage. Refer to Change Length with Specified Percentage for further information. |
|
Total |
Changes the length of objects with a specified total length. Refer to Change Length with Specified Total Length for further information. |
|
Dynamic |
Changes the length of objects dynamically. Refer to Change Length Dynamically for further information. |
|
Length |
Displays the length of the currently selected object on the status bar. |
|
Back |
Undoes the last action. |
|
Finish |
Ends the command. |
