Draw Rectangle with Specified Centre Point and Set Fillet Radius
- Last UpdatedApr 08, 2024
- 2 minute read
Draws a rectangle with a specified centre point and a set fillet radius.
The prompt Specify the first corner or <Centre> is displayed.
Input F at the prompt and press Enter.
The prompt Specify the fillet radius <#mm> is displayed.
Input a value in the dimension field and press Enter. The radius is applied to all rectangles drawn in the session.
The prompt Specify the first corner or <Centre> is displayed.
Input C at the prompt and press Enter.
The prompt Specify centre point or <Fillet> is displayed.
Input values in the dimension fields and press Enter or click to identify the center of the rectangle.
The prompt Specify the width is displayed.
Input a dimensional value in the field and press Enter or move the cursor left or right to define the width of the rectangle. Click to confirm the required width.
The prompt Specify the height is displayed.
Input a dimensional value in the field and press Enter or move the cursor up or down to define the height of the rectangle. Click to confirm the required height.
The rectangle is drawn and the command ends automatically.
Press ESC to cancel the command. Additional functionality is also available.
|
|
|
|
Fillet |
Sets the fillet radius of the corners. |
|
Centre |
Draws a rectangle with a specified centre point. Refer to Draw Rectangle with Specified Centre Point for further information. |
|
Back |
Undoes the last action. |
