Add XLines with Two Selected Points
- Last UpdatedApr 20, 2023
- 2 minute read
Adds an XLine with two selected points through which the line passes, therefore specifying the position and angle.
You are prompted to Specify a point or <Finish>
Input values in the dimension fields and press Enter or click to identify the first point through which the line is drawn.
You are then prompted to Specify through point or <Finish>
Input values in the dimension fields and press Enter or click to identify the second point through which the line is drawn. A line is drawn through the two points.
The prompt is repeated, allowing you to create multiple Xlines from the insertion point.
Input F at the prompt and press Enter to end the command.
Throughout the Xline creation process you can press ESC to cancel the command. Additional functionality is also available.
|
|
|
|
Hor |
Press the down arrow key and select Hor to add horizontal XLines. Refer to Add Horizontal XLines for further information. |
|
Ver |
Press the down arrow key and select Ver to add vertical XLines. Refer to Add Vertical XLines for further information. |
|
Ang |
Press the down arrow key and select Ang to add XLines by specifying the angle. Refer to Add XLines with a Specified Angle for further information. |
|
Bisect |
Press the down arrow key and select Bisect to add bisecting XLines. Refer to Add Bisect XLines for further information. |
|
Finish |
Press the down arrow key and select Finish to end the command. |
|
Undo |
Press the down arrow key and select Undo to undo the last action. |
|
Main |
Press the down arrow key and select Main to add a different XLine type. Refer to Add XLines for further information. |
The new NOTE element displays in the Draw Explorer containing a STRAI element that represents each Xline.
