Hanger Tab
- Last UpdatedNov 13, 2023
- 3 minute read
By default, a separate tab displays on the Support Editor window for the hanger and each of the associated ancillaries.
The 2D View part of the Support Editor window allows you to modify the size and position of the hanger and each of the associated ancillaries.
The values in the text fields can be modified to define the size and position of a hanger.
|
|
Select default tab |
Click to display the default tab. The default tab is the first tab created and is positioned furthest left. |
|
|
Select ancillary tab by canvas pick |
Click to display the tab for an identified ancillary using a cursor pick in the 3D view. You are prompted to Identify ancillary in current support |
|
|
2D/3D View |
Click to display a 3D view of the hanger. Refer to 3D View Tab for further information. |
|
Dimensions |
Input values in the Dimensions fields to explicitly modify the dimensions of the hanger. If a value is entered that is outside the allowable range, an error message displays summarizing the problem.
|
|
|
|
Change hanger rod size |
Allows you to modify the size of the hanger rod. Refer to Modify Hanger Rod Size for further information. |
|
|
Select spring for hanger |
Allows you to modify the spring type for the hanger. Refer to Modify Hanger Spring Type for further information. |
|
|
Modify Spring Travel |
Allows you to modify the spring travel for the hanger. Refer to Modify Hanger Spring Travel for further information. |
|
Distance/Clearance |
Allows you to position the hanger. The functionality is identical to the positioning of a preliminary support. Refer to Preliminary Tab for further information. |
|
|
Distance from Support/Distance from pipe element |
Allows you to position of the hanger. The functionality is identical to the positioning of a preliminary support. Refer to Preliminary Tab for further information. |
