Create Route Node
- Last UpdatedJan 23, 2023
- 3 minute read
Creates and positions a route node on a selected cableway branch. A route node is a multi-purpose reference point created on the cableway branch.
The Route Node Create Tasks window can be used as an dual purpose window, which allows the Creation of a new route node or the Modification of an existing route node.
Cableway Branch
The currently selected cableway branch in the model explorer is displayed.
Current Element
The currently selected element in the model explorer is displayed.
Route Node Name
Enter a name for the Route Node Name element or the name can be automatically generated using the Autonaming icon to the right of the text box.
General Attributes
Defines the description, function and purpose for the route node.
Route Node Type
Use to select the route node type:
Takeoff - here
Defines the node from which the cable can leave or enter the cableway.
Gap
Defines the node which forces a gap to be left between the cable tray material and is positioned at the centre point of the gap. Gap (YOffset), defines the gap size default is 0mm.
Offset
Use this node to position transit glands and fittings.
Penetration
Use this node to hold references of penetrations.
Report
Use this node to report information (such as passing cables) from any position along the branch.
Positioning
Defines the position of the route node on the cableway branch.
Reference Point
Select a reference point from the drop-down menu (the Offset Distance is automatically populated) or select Pick, a prompt to Pick on the segment which RNODE should be placed is displayed.
Offset Distance
Input an offset distance in the Offset Distance box or select Pick a prompt to Pick to define position (Snap) Snap is displayed.
Move Distance
To increase or decrease the Offset, select the appropriate arrow either side of the Move Offset box.
Note:
When using the Move Offset and Proportional Distance functionality on Cableways with
bends, the offset is measured from the edge of the bend rather than the Reference
Point.
|
Proportional Distance |
Enter a proportional Distance. |
|
X Offset |
Enter an X axis offset. |
|
Z Offset |
Enter an Z axis offset. |
|
Gap (Y Offset) |
Reserves a space between cable trays. Enter the required distance. |
References
The References part of the Route Node Create Tasks window defines.
|
Connection |
Allows a Route Node to be connected to a Control Node. Clicking Pick displays the Select CNODE window. |
|
Specification |
Enter a specification or select Choose to display the Choose Route Node window, from which a specification can be selected. |
Select the Mark Route Points checkbox to display the route point labels on the 3D view.
List Associated Cables
To display associated cables, select List Associated Cables to display the List of Cables window, listing all the associated cables.
The new route node is a created and displayed the Model Explorer. The position of the created routed node on the cableway branch is shown in the 3D view.
Mark Route Nodes
Displays the route nodes on a cableway network and identifies their position in the 3D view.
Select which set of route nodes to display in the Mark Route Nodes window.
Mark Selected
Use to select individual route nodes.
Unmark Selected
Use to unmark selected individual route nodes.
Mark All
Use to select all route nodes in the list.
Unmark All
Use to de-select all the route nodes in the list.
The list of Route Nodes displayed is divided into the following columns:
|
Name |
Displays the name of the route node. |
|
Branch name |
Displays the cableway branch name. |
|
World position |
Displays the route node's position with respect to World. |
|
Type |
Displays the type of route node. |