Stair Flight

The Stair Flight part of the Create Standard window allows the administrator to define the Pitch Validation Formula and Constraints for the stair flight.

To remove Stair Flights from the standard, click to clear the Included check box.

Pitch Validation Formula

The user is required to select the pitch validation formula. Standards define the pitch validation in different ways, the Pitch Validation Formula part of the Create Standard window has three default formulas:

• 2 x Rise + Going

• Rise + Going

• Rise x Going

Select the required radio button to define the pitch validation formula.

Constraints

The administrator is required to complete the minimum and maximum values of all constraints for the stair flight. Blank values are only permitted for certain constraints.

Acceptable values input by the administrator into the minimum or maximum cells of the Constraints list are highlighted in green.

If a value is entered and it is incorrect, an error message displays summarizing the problem.

All errors display at the bottom of the list of constraints. When there are no errors the status displays as Complete.

To visualize how the constraints equate to the stair flight, click Show diagram to display the Stair Flight Parameters window.

Click Next to display the Handrail part of the Create Standard window. Refer to Handrail for further information.

Click Back to return to the General part of the Create Standard window.

Click Cancel to discard any inputs and return to the SLH Administration Tasks window.