Tail - Gravity Horizontal
- Last UpdatedJul 10, 2024
- 2 minute read
Defines the takeup and counter weight dimensions for Takeup at Tail with Gravity Horizontal selected.
Takeup
Displays a graphical representation of the Takeup arrangement.
ALPHA
Specifies the Alpha Angle
D
Specifies the Takeup Diameter
D1
Specifies the Takeup Snub Diameter1
D2
Specifies the Takeup Snub Diameter2
D3
Specifies the Takeup Snub Diameter3
E
Specifies the Horizontal Length (E) from TAIL Pulley To Takeup
H1
Specifies the Vertical Length (H1) From Working Position To Takeup
H2
Specifies the Vertical Length (H2) From Working Position To Takeup
Zoom In/Out
Zooms in/out to these dimensions in the 3D view.
Counter Weight
Displays the graphical representation of the Counter Weight arrangement.
I
Specifies the Tower Height
K
Specifies the Cable Distance
L
Specifies the Distance from the Pulley
No OF BLOCKS
Specifies the Concrete Block No.Specifies the Concrete Block No
Mirror Off/On
Mirrors the tower position about the conveyer centerline.
Next
Displays the orthogonal view of the counter weight arrangement.
A
Specifies the Bearing Center Distance
B
Specifies the Bearing Backing
C
Specifies the Concrete Block Length
H
Specifies the Tower Height
M
Specifies the Distance to Floor
O
Specifies the Distance to the Concrete Block
W
Specifies the Width from the Pulley
Back
Displays a graphical representation of the counter weight arrangement.
Mirror Off/On
Mirrors the tower position about the conveyer centerline.