Profiles

S3D Cross Section Flip Ends

Provides information on the orientation of the profile.

Note:
In most cases, the entry will be Yes.

S3D Cross Section Rotation

Displays the incremental angle for rotation (usually 0 degrees).

Update

Use to add the E3D data from the currently selected project to the existing information displayed in the Piping Connections window.

Note:
All the mapping is preserved.

Reset

Use to clear all the defined mapping and populates the table with all the E3D information from the currently selected project.

Save Defaults

Use to save all the mapping defined in the table, all the files are located in ‘\program_dir\Resources’ folder. The files have a.dat extension.

Load Defaults

Use to load all the mapping defined in the table, all the files are located in ‘\program_dir\Resources’ folder. The files have a.dat extension.

Auto Map

This functionality is applicable only for empty cells in the table. It analyzes the E3D information and create the correct mappings, the mapping for all other entries in the table remain unchanged.

Mappings for Auto Map are defined in xml files located in the ‘\program_dir\Mapping\’ folder.

Note:
Manual editing of these files are required for improved auto mapping of specific projects.

Update S3D Profiles

Use to update the S3D profiles.