Create Design View with Specified Corners
- Last UpdatedApr 20, 2023
- 2 minute read
Creates a view of the design with specified corners.
You are prompted to Specify the first corner or
Input values in the dimension fields and press Enter or click to identify the first corner of the view.
You are then prompted to Specify the opposite corner or
Input values in the dimension fields and press Enter or click to identify the opposite corner of the view.
You are then prompted to Modify view <Finish>
Input F at the prompt and press Enter to end the command. The view is created and displays in 3D view mode.
Throughout the view creation process you can press ESC to cancel the command. Additional functionality is also available.
|
|
|
|
Centre |
Press the down arrow key and select Centre to create a design view with a specified center point. Refer to Create Design View with Specified Center Point for further information. |
|
Back |
Press the down arrow key and select Back to undo the last action. |
|
Finish |
Press the down arrow key and select Finish to end the command. |
The new VIEW element displays in the Draw Explorer.
Add elements to the view as required. Refer to Add and Remove Model Items to/from the 3D View for further information. The Format 3D tab can also be used to further modify the view. Refer to Format 3D Tab for further information.
Press Enter when the view is complete.