Draw Hexagon with Specified Center to Point Radius
- Last UpdatedJan 23, 2023
- 2 minute read
Draws a hexagon with a specified radius from the center to one of its edge points.
You are prompted Specify the centre point or <Diameter>
Input values in the dimension fields and press Enter or click to identify the center point of the hexagon.
You are then prompted to Specify the radius or
Input a value in the dimension field and press Enter or click to identify a corner of the hexagon.
A hexagon is drawn and the command ends automatically.
Throughout the hexagon creation process you can press ESC to cancel the command. Additional functionality is also available.
|
|
|
|
Diameter |
Press the down arrow key and select Diameter to draw a hexagon with a specified point to point diameter. Refer to Draw Hexagon with Specified Point to Point Diameter for further information. |
|
Median |
Press the down arrow key and select Median to draw a hexagon with a specified radius from the center to one of its sides. Refer to Draw Hexagon with Specified Center to Side Radius for further information. |
|
Back |
Press the down arrow key and select Back to undo the last action. |
The new NOTE element displays in the Draw Explorer containing a HEXA element.
