Add overlap to panel limits using Properties grid

Prerequisite

• The limits are defined by a stiffener. For further information, see Create panel limited by stiffener and by plane.

• The panel and stiffener have the same location plane.

You can add an overlap to defined limit using the Properties grid.

1. On the Home tab, in the Display group, select Properties to display the Properties grid.

   

2. In the Model Explorer on the panel defined by limits, expand IBNDRY to display the defined limits.

   

3. Select a limit which is defined by the stiffener to display the properties of the limit in the Properties grid. In this example, it is ILIM 1.

   

4. Select Adjustments.

5. Select the arrow icon to display the dropdown list.

   

   For more information, see Adjustments on Limits in Hull Design.

6. Select Overlap to switch the panel to the other limit side.

   

   Additionally, you make the Overlap entry in the Properties grid available.

   

7. Enter an Overlap value in mm, for example, 250.

   The application extends the panel by 250 mm to enable the overlap.