Set Chamfer Distance

Sets the chamfer distance measured from the endpoint of a selected edge

You are prompted to Select option: <Select object>

Input D at the prompt or press the down arrow key and select Distance.

You are then prompted to Specify first chamfer distance <#mm>

Input a dimensional value in the field and press Enter to specify the first chamfer distance.

You are then prompted to Specify second chamfer distance <#mm>

Input a dimensional value in the field and press Enter to specify the second chamfer distance.

The distances are used for all subsequent chamfers until changed.

You can continue to chamfer objects. Refer to Chamfer Objects or Chamfer Multiple Objects for further information.