Adjustments on Limits in Hull Design
- Last UpdatedMar 06, 2026
- 2 minute read
On a selected panel defined by model limits, you can adjust the limit in the Properties grid.
Select a limit of panel in the 3D View or in the Model Explorer which is defined by a plane or another model.
Note: On the Hull Design tab, in the Visibility group, select the Brackets icon and the Thin Model icon to turn on the visibility of brackets.
The Properties grid displays the Adjustments.
Select the arrow icon to display the dropdown list.
|
Offset |
Defines an offset from the limits of the panel and displays further options.
|
|
|
Offset |
Enter an Offset value in mm. |
|
|
Offset direction |
Defines the offset direction. For more information, see Direction. |
|
|
Overlap |
Defines an overlap to the limits of the panel.
The plate position is adjusted relative to the panel as required.
|
|
|
Overlap |
Enter an Overlap value in mm. |
|
|
Full overlap |
Defines a full overlap to the limits of the panel.
The application determines the overlap value using the height of the profile to overlap. |
|
For more information, see Add overlap to panel limits using Properties grid.