Tread Template Profiles
- Last UpdatedFeb 23, 2023
- 2 minute read
The Profiles part of the Create Tread Template window allows the administrator to define the Profiles used in the tread template. The profiles are positioned using p-points which are specified by the administrator. If a p-point is selected that requires the presence of a parameter, the SLH application includes the parameter by default.
The Profiles list displays all of the profiles available for the template. The administrator can add, remove and replace profiles. The currently selected profile displays in the 3D view.
|
Add |
Click to add a profile to the Profiles list. |
|
Remove |
Click to remove a profile from the Profiles list. |
|
Replace |
Click to replace the currently selected profile in the Profiles list. |
|
Specification |
Click Select to display the Profile for tread template window. The functionality available from the Profile for tread template window is identical to that available from the Top Rail Specification window. Refer to Handrail Profile Specification for further information. The selected Profile Type and Profile Size values display in the Profile column of the Profiles list. The selected P-Line Justification value displays in the Justification column of the Profiles list. |
|
Angle of Rotation |
Input a value to define the rotation angle for the profile. The Angle of Rotation value displays in the Rotation column of the Profiles list. |
|
Configuration |
Select a configuration from the drop-down list to specify the profile type. This is only a label, it does not affect the geometry of the profile. The selected Configuration value displays in the Description column of the Profiles list. |
|
Start Point |
Select a start point from the drop-down list to define the start p-point position for the profile. The selected Start Point value displays in the Start column of the Profiles list. |
|
End Point |
Select an end point from the drop-down list to define the end p-point position for the profile. The selected End Point value displays in the End column of the Profiles list. |
|
Flip |
Click Flip to display swap values of the Start Point and End Point drop-down lists. |
Click Next to display the Plates part of the Create Tread Template window. Refer to Tread Template Plates for further information.
Click Back to return to the Parameters part of the Create Tread Template window.
Click Cancel to discard any inputs and return to the SLH Administration Tasks window.