Pick Tread

Use to pick the location of the intermediate landing in the 3D view, the treads available for selection are displayed solid objects.

Click Pick Tread, you are prompted to SLH Stair Flight - Pick an aid line Pick Aid.

Note:
A minimum of two treads at the bottom and top of any stair flight is required.

The intermediate landing automatically moves up or down depending upon the selection made in the 3D view, the Rises Above and Rises Below boxes are also automatically updated to reflect the amendment.

Finished Floor Level

At the time of this release, a TOS Finished Floor Level is the only option available.

To create the new stair flight element, click Build Stair Flight.

Upon creation of the STRFLT element, the MODEL module analyzes the horizontal (Overall Going) and vertical (Overall Rise) distances between the Lower and Upper Work Points (LWP/UWP) and validates these positions against the engineering criteria of the Stair Flight to the criteria of the current specification. If the system analysis validates the values against the engineering criteria the system creates the Stair Flight and populates the attributes with the appropriate data.

Click Back to return to the Stair Configuration part of the Create Stair Flight window.

Click Cancel to discard any inputs and close the Create Stair Flight window.