AVEVA™ Unified Engineering

Weight and Center of Gravity Label

Save PDF

Save PDF

Adds a weight and center of gravity label to a view.

Note:
Weight and centre of gravity labels are generated from a special Symbol Template (SYTM). To setup the default template for this label type:

The correct Advanced Labels library must be set in the System Defaults. Refer to Set System Defaults for further information.
The SpPurpose attribute of the selected library template must be set to WCOG

You are prompted to Select design element

Click to identify the design element to be labelled. For example an IPLATE element.

You are then prompted to Use element <element name> or

Press Enter to use the selected design element as the element to be labelled.

If the centre of gravity of the selected design element is inside the view frame, the label leader line attachment point is automatically defined.

If the centre of gravity of the selected design element is outside the view frame, you are prompted to Specify attachment point

Input values in the dimension fields and press Enter or click to identify the label leader line attachment point.

You are then prompted to Specify connection point or

Input values in the dimension fields and press Enter or click to identify the position of the label text.

The process can be repeated, allowing you to add multiple labels.

Press ESC to end the command.

Throughout the label creation process you can press ESC to cancel the command. Additional functionality is also available.


1 UPANEL	Press the down arrow key and select 1 UPANEL to add a label with a center of gravity derived from the owning UPANEL element.
2 ZONE	Press the down arrow key and select 2 ZONE to add a label with a centre of gravity derived from the owning ZONE element.
3 ASMBLY	Press the down arrow key and select 3 ASMBLY to add a label with a center of gravity derived from the owning ASSEMBLY element. Note: The functionality is only available if the selected design element is a defined as part of an assembly.
Template	Press the down arrow key and select Template to select a different label template.
Same As	Press the down arrow key and select Same As to select a different label template derived from an existing label on the drawing canvas. You are prompted to Select label element Click to identify the label, the template of the selected label is used for the created label.

The new SLAB element displays in the Draw Explorer.