Tail - Gravity Inclined
- Last UpdatedJul 10, 2024
- 2 minute read
Defines the takeup and counter weight dimensions for Takeup at Head with Gravity Horizontal selected.
Takeup
Displays a graphical representation of the Takeup arrangement.
ALPHA
Specifies the Alpha Angle
D
Specifies the Takeup Diameter
D1
Specifies the Takeup Snub Diameter1
D2
Specifies the Takeup Snub Diameter2
E
Specifies the Horizontal Length (E) From TAIL Pulley To Takeup
H
Specifies the Vertical Length (H) From Working Position To Takeup
Zoom In/Out
Zooms in/out to these dimensions in the 3D view.
Counter Weight
Displays the graphical representation of the Counter Weight arrangement.
I
Specifies the Tower Width
L
Specifies the Distance From Pulley
No OF BLOCKS
Specifies the Concrete Block No.
Mirror Off/On
Mirrors the tower position about the conveyer centerline.
Next
Displays the orthogonal view of the counter weight arrangement.
A
Specifies the Bearing Center Distance
B
Specifies the Bearing Backing
C
Specifies the Concrete Block Length
H
Specifies the Tower Height
K
Specifies the Cable Distance
M
Specifies the Distance to Floor
O
Specifies the Distance to the Concrete Block
W
Specifies the Width from the Pulley
Back
Displays a graphical representation of the counter weight arrangement.
Mirror Off/On
Mirrors the tower position about the conveyer centerline.