Modify Straight Wall
- Last UpdatedMay 05, 2023
- 2 minute read
Modifies the position, length and direction of a straight wall.
By default the Start position of the current element displays as East, North and Up coordinates with respect to the world.
Click Select CE to identify the currently selected element as the working element. Alternatively, click Pick a Wall to select a different wall, you are prompted to Pick Wall to Modify: The name of the selected element displays in the Modify STWALL window.
The Start position is indicated in the 3D view.
The Position options allow you to specify the point on the element to which the position coordinates apply. You can specify Start, End or Centre from the drop-down list.
Dependant on the option specified, modification of coordinates has an effect on the CE. Refer to Coordinates for further information.
|
Start |
Relocates the start position of the element to the specified coordinates, and leaves its end position unchanged. |
|
End |
Relocates the end position of the element to the specified coordinates, and leaves its start position unchanged. |
|
Centre |
Relocates the entire element, locates its centre at the specified coordinates and modifies the start and end positions. |
To define a position by reference to design items that already exist, use the Positioning Control window and the cursor to identify the required position using a cursor pick in the 3D view. Refer to Positioning Control for further information.
The Settings option allows you to change the length and direction of the wall.
The End Direction option allows you to change the end direction to Perpendicular or you can Maintain the original direction.
Click Apply to modify the straight wall or click Cancel to discard any inputs and close the Modify STWALL window.