Dragging Equipment and Nozzles
- Last UpdatedFeb 19, 2025
- 3 minute read
Keywords
DRAG AT BY POSITION MOVE
Description
This command repositions the current element and constrained network to the specified position. The DRAG command can be followed by any standard Equipment and Civils positioning or moving command.
Examples |
|
|---|---|
|
DRAG AT E3000 |
The current element and constrained network will be dragged to the specified position. |
|
DRAG BY N500 U500 |
The current element and constrained network will be dragged by the specified amount. |
|
DRAG MOVE E2000 |
The current element and constrained network will be moved to the specified position. |
|
DRAG MOVE N CLEAR 1000 INF /BUILD10 |
The current element and constrained network are moved North to the specified clearance in front of element /BUILD10. |
Command Syntax
The full DRAG command syntax is extensive but may be summarized as follows:
>-- DRAG --+-- <absol> --.
| |
‘-- <relat> --+-->
where:
<absol>
defines any absolute positioning command,for example, AT, POS, etc.
<relat>
defines any relative positioning command, for example,. BY, MOVE, etc.
The full expanded syntax is given below for reference:
<absol> = >--+-- AT --+-- <bpos> ---.
| | |
| ‘-- <polar> --|
| |
|-- <pppos> --. |
| | |
‘-- <polar> --+--------+-->
<polar> = >--+-- POLar <bdir> --.
| |
‘-------------------+-- <plane> -->
<pppos> = >-- POSition --+-- <marke> --+-- AT --+-- <bpos> ---.
| | | |
| | ‘-- <polar> --|
| | |
| ‘-- <polar> -----------|
| |
|-- AT --. |
| | |
‘--------+-- <bpos> ---. |
| | |
‘-- <polar> --+-------------+-->
<plane> = >-+- PLAne <bdir> -+- DISTance <uval> -+- <repla> ------.
| | | |
| | ‘----------------|
| | |
| |- <repla> --------------------------|
| | |
| |- THRough <bpos> -------------------|
| | |
| ‘- CLEArance -+- <uval> -. |
| | | |
| ‘----------+- <repla> -|
| | |
| |- <planf> -|
| | |
| ‘-----------|
|- DISTance - <uval> -+- <repla> -. |
| | | |
| |- <planf> -| |
| | | |
| ‘-----------+-------------------|
| |
|- CLEArance -+- <uval> -. |
| | | |
| ‘----------+- <repla> -. |
| | | |
| |- <planf> -| |
| | | |
| ‘-----------+----------------|
| |
|- <repla> -------------------------------------------|
| |
|- THRough <bpos> ------------------------------------|
| |
‘- <planf> -------------------------------------------+>
<repla> = >--+-- INFront --.
| |
|-- BEHind ---+-- <sgid> ---.
| | |
| |-- <marke> --|
| | |
| ‘-- <bpos> ---|
| |
|-- FROm --. |
| | |
‘-- TO ----+-- <bpos> ------+-->
<planf> = >--+-- ONTop --.
| |
‘-- UNDer --+-- <sgid> ---.
| |
|-- <marke> --|
| |
‘-- <bpos> ---+-->
<relat> = >--+-- BY <pos> --+-- WRT --.
| | |
| |-- IN ---+-- <sgid> --.
| | |
| ‘----------------------|
| |
‘-- <relmo> --------------------------+-->
<relmo> = >- MOVe -+- <marke> -+- ALOng -.
| | |
| |---------+- <bdir> <plane> ----.
| | |
| |- BY <pos> -+- WRT -. |
| | | | |
| | ‘- IN --+- <sgid> -|
| | |
| ‘- <plane> ---------------------|
| |
|- ALOng -. |
| | |
|---------+- <bdir> <plane> ----------------|
| |
|- BY - <pos> -+- WRT -. |
| | | |
| ‘- IN --+- <sgid> -----------|
| |
‘-- <plane> --------------------------------+->
Dragging Equipment and Nozzles by a specified amount
Dragging Equipment and Nozzles to a specified position
Dragging Equipment and Nozzles to a specified position