Positioning Head or Tail in Free Space
- Last UpdatedFeb 19, 2025
- 1 minute read
Keywords
HPOS HBOR HDIR HCON TPOS TBOR TDIR TCON
Description
It is sometimes necessary to terminate a Branch (or Hanger) in free space; for instance, where a Branch reaches the Battery Limits. Where this termination ends with a length of TUBE (or ROD) and no Head or Tail connection can be made, it is necessary to set the Head/Tail attributes individually.
Examples |
|
|---|---|
|
HPOS E10 N5 U5 |
The Head position is set as specified in owner coordinates. |
|
HDIR N WRT WORLD |
The Head direction is set as specified in World coordinates. |
|
HBOR 80 |
The Head Bore is set as specified. |
|
HCON OPEN |
The Head Connection Type is set as specified. |
Note:
If a data consistency error is to be avoided, the HCONN or TCONN of a free end must
be set to one of the following: OPEN, CLOS, VENT, DRAN (drain), or NULL.
Command Syntax
>--+-- HPos --.
| |
‘-- TPos --+-- <bpos> -->
>--+-- HDir --.
| |
‘-- TDir --+-- <bdir> -->
>--+-- HBOre --.
| |
‘-- TBore --+-- <uval> -->
>--+-- HCOnn --.
| |
‘-- TCOnn --+-- word -->
Querying
>-- Query --+-- PHead --.
| |
|-- HHead --|
| |
|-- PTail --|
| |
‘-- HTail --+-->