Set Chamfer Angle

Sets the chamfer angle using a chamfer length and angle measurement.

You are prompted to Select option: <Select object>

Input A at the prompt and press Enter.

You are then prompted to Specify chamfer length on the first line <#mm>

Input a dimensional value in the field and press Enter to specify the chamfer length.

You are then prompted to Specify chamfer angle from the first line

Input an angular value in the field and press Enter to specify the chamfer angle.

The distance and angle are used for all subsequent chamfers until changed.

You can continue to chamfer objects. Refer to Chamfer Objects or Chamfer Multiple Objects for further information.