Panel Template Optional Parameters
- Last UpdatedFeb 23, 2023
- 2 minute read
The Optional Parameters part of the Create Panel Template window allows the administrator to define the optional Panel Template dimensions.
|
Upper Intermediate Rail Height |
Input a value to define the upper intermediate rail height for the template. To remove the upper intermediate rail height element from the template, click to clear the Included check box. |
|
Lower Intermediate Rail Height |
Input a value to define the lower intermediate rail height for the template. To remove the lower intermediate rail height element from the template, click to clear the Included check box. |
|
Mounting Plate Thickness |
Input a value to define the mounting plate thickness for the template. To remove the mounting plate thickness element from the template, click to clear the Included check box. |
|
Mounting Plate Width |
Input a value to define the mounting plate width for the template. To remove the mounting plate width element from the template, click to clear the Included check box. |
|
Mounting Plate Length |
Input a value to define the mounting plate length for the template. To remove the mounting plate length element from the template, click to clear the Included check box. |
|
Extension Plate Thickness |
Input a value to define the extension plate thickness for the template. To remove the extension plate thickness element from the template, click to clear the Included check box. The functionality is not available for top mounted handrail panel templates. |
|
Rise |
Input a value to define the rise for the template. The panel template rise is the vertical distance of the panel from the RPATH when a panel assembly is used on a slope. |
The diagram below illustrates the Panel Template dimensions as an example:
Click Next to display the Profiles part of the Create Panel Template window. Refer to Panel Template Profiles for further information.
Click Back to return to the Mandatory Parameters part of the Create Panel Template window.
Click Cancel to discard any inputs and return to the SLH Administration Tasks window.