Create Design View with Specified Center Point

Creates a view of the design with a specified center point.

You are prompted to Specify the first corner or

Input C at the prompt and press Enter.

You are then prompted to Specify the centre point or

Input values in the dimension fields and press Enter or click to identify the center of the view.

You are then prompted to Specify the width

Input a dimensional value in the field and press Enter or move the cursor left or right to define the width of the view. Click to confirm the required width.

You are then prompted to Specify the height

Input a dimensional value in the field and press Enter or move the cursor up or down to define the height of the view. Click to confirm the required height. The view is created.

You are then prompted to Modify view <Finish>

Input F at the prompt and press Enter to end the command. The view is created and displays in 3D view mode.

Throughout the view creation process you can press ESC to cancel the command. Additional functionality is also available.

The new VIEW element displays in the Draw Explorer.

Add elements to the view as required. Refer to Add and Remove Model Items to/from the 3D View for further information. The Format 3D tab can also be used to further modify the view. Refer to Format 3D Tab for further information.