Draw Ellipse with Specified Length of Axes and Rotation
- Last UpdatedJan 23, 2023
- 2 minute read
Draws an ellipse with a specified length of axes and rotation.
You are prompted to Specify the start of the first axis or <Centre>
Input values in the dimension fields and press Enter or click to identify the start point of the first axis of the ellipse.
You are then prompted to Specify the first axis length or
Input a dimensional value in the field and press Enter or click to identify the length of the first axis.
You are then prompted to Specify the second axis length or <#mm>
Input R at the prompt and press Enter.
You are then prompted to Specify the rotation around the first axis or <#deg>
Input an angular value in the field and press Enter or click to identify the angle of rotation around the first axis.
The ellipse is drawn and the command ends automatically.
Throughout the ellipse creation process you can press ESC to cancel the command. Additional functionality is also available.
|
|
|
|
Centre |
Press the down arrow key and select Centre to draw an ellipse with a specified radius of the first axis and the length of the second axis. Refer to Draw Ellipse with Specified Radius of First Axis and Length of Second for further information. |
|
Distance |
Press the down arrow key and select Distance to cancel the rotation and return to the Specify the second axis length or <#mm> prompt. |
|
Back |
Press the down arrow key and select Back to undo the last action. |
The new NOTE element displays in the Draw Explorer containing an ELLI element.
