Understand Countdown alarm message to the alarm severity configuration
- Last UpdatedApr 24, 2025
- 2 minute read
Note: The messages noted in the table are designated as either alarms that generate identical
events or simple events. In all cases, you can customize the message text and, where
applicable, adjust the alarm severity.
To update the alarm message or severity configuration, refer to the msgInfo table
row for Alarm Message Identifier of interest. For more information on configuration
using the msgInfo table, refer to Volume 1 of the RealTime Administrator documentation.
|
Alarm/Event |
Alarm/Event Message Configuration |
Alarm Severity Configuration |
Type |
|---|---|---|---|
|
Countdown on <RECORD NAME> has completed. |
COUNTDOWN_CONFIG_SOURCE_COMPLETED |
Configured using the Completed alarm severity field on the Countdown Configuration ADE screen. |
Alarm & Event |
|
Countdown on <RECORD NAME> will complete in <TIME> minute<s> (Warning Time 1). |
COUNTDOWN_CONFIG_SOURCE_WARNING_TIME1 |
Configured using the Pre-zero alarm severity field on the Countdown Configuration ADE screen. |
Alarm & Event |
|
Countdown on <RECORD NAME> will complete in <TIME> minute<s> (Warning Time 2). |
COUNTDOWN_CONFIG_SOURCE_WARNING_TIME2 |
Configured using the Pre-zero alarm severity field on the Countdown Configuration ADE screen. |
Alarm & Event |
|
Countdown on <RECORD NAME> has <VOLUME> <UNITS> remaining (Warning Volume 1). |
COUNTDOWN_CONFIG_SOURCE_WARNING_VOLUME1 |
Configured using the Pre-zero alarm severity field on the Countdown Configuration ADE screen. |
Alarm & Event |
|
Countdown on <RECORD NAME> has <VOLUME> <UNITS> remaining (Warning Volume 2). |
COUNTDOWN_CONFIG_SOURCE_WARNING_VOLUME2 |
Configured using the Pre-zero alarm severity field on the Countdown Configuration ADE screen. |
Alarm & Event |
|
Countdown on <RECORD NAME> changed from Active to Stopped. |
COUNTDOWN_CONFIG_STATE_ACTIVE_TO_STOPPED |
N/A |
Event |
|
Countdown on <RECORD NAME> changed from Pending to Stopped. |
COUNTDOWN_CONFIG_STATE_PENDING_TO_STOPPED |
COUNTDOWN_CONFIG_STATE_PENDING_TO_STOPPED |
Event |
|
Countdown on <RECORD NAME> changed from Pending to Wait. |
COUNTDOWN_CONFIG_STATE_PENDING_TO_WAIT |
COUNTDOWN_CONFIG_STATE_PENDING_TO_WAIT |
Event |
|
Countdown on <RECORD NAME> changed from Stopped to Completed. |
COUNTDOWN_CONFIG_STATE_STOPPED_TO_COMPLETED |
COUNTDOWN_CONFIG_STATE_STOPPED_TO_COMPLETED |
Event |
|
Countdown on <RECORD NAME> changed from Wait to Active. |
COUNTDOWN_CONFIG_STATE_WAIT_TO_ACTIVE |
COUNTDOWN_CONFIG_STATE_WAIT_TO_ACTIVE |
Event |
|
Configuration error at Countdown <RECORD NAME>: 'Deltas required to determine direction' is not configured between 1 and 10. System will default to 3. |
COUNTDOWN_CONFIG_CONFIGURATION_ERROR |
COUNTDOWN_CONFIG_CONFIGURATION_ERROR |
Event |